manufacturer category series package voltage class rev . date ecliptek corp. oscillator eh11 8 pin dip 5.0v os45 08/05 800-ecliptek www.ecliptek.com for latest revision 62 specifications subject to change without notice. eh11 series ? rohs compliant (pb-free) hcmos/ttl output 5.0v supply voltage 8 pin dip package stability to 20ppm custom lead length and gull wing options available oscillator eh11 electrical specifications inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration w/ttl load w/hcmos load w/ttl load w/hcmos load at 1.4v dc w/ttl load; at 50% of waveform w/hcmos load ( 70.000mhz) at 50% of waveform w/ ttl load or w/hcmos load (>70.000mhz) at 50% of waveform w/ttl load or w/hcmos load 0.8v dc to 2.0v dc w/ttl load or 20% to 80% of waveform w/hcmos load ( 70.000mhz) 0.8v dc to 2.0v dc w/ttl load or 20% to 80% of waveform w/hcmos load (>70.000mhz) v ih :no connection v ih : 2.2v dc v il : 0.8v dc 70.000mhz >70.000mhz 1.000mhz to 155.520mhz 0c to 70c or -40c to 85c -55c to 125c 5.0v dc 10% 50ma maximum (unloaded) 100ppm, 50ppm, 25ppm, or 20ppm maximum 2.4v dc minimum i oh =-16ma v dd -0.4v dc minimum i oh =-16ma 0.4v dc maximum i ol =+16ma 0.5v dc maximum i ol =+16ma 50 10(%) (standard) 50 10(%) (standard) 50 5(%) (optional) 6 nseconds maximum 4 nseconds maximum enables output enables output disables output: high impedance 5ppm / year maximum 10 mseconds maximum 10ttl load or 50pf hcmos load maximum 5ttl load or 15pf hcmos load maximum 250psec maximum, 100psec typical 50psec maximum, 30psec typical frequency range operating temperature range storage temperature range supply voltage (v dd ) input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) duty cycle (v dd =5.0v dc ) rise time / fall time tri-state input voltage aging (at 25c) start up time load drive capability period jitter: absolute period jitter: one sigma h 5.6 l 13.2 w 13.2
manufacturer category series package voltage class rev . date eh11 00 hs et t ts - 70.000m - g tr frequency tolerance / stability 00=100ppm max.(standard), 45=50ppm max. 25=25ppm max., 20=20ppm max. package hs=half size 8 pin dip operating temp. range blank=0c to 70c (standard), et=-40c to 85c duty cycle blank=50 10(%) (standard), t=50 5(%) packaging options blank=bulk (standard), tr= tape & reel (only offered with half size g and half size g2 options) available options blank=none (standard) clxxx=custom lead length (see page 133) g=half size gull wing (see page 132) g2=half size gull wing (see page 132) frequency output control function ts=tri-state enable high part numbering guide ecliptek corp. oscillator eh11 8 pin dip 5.0v os45 08/05 700 pieces per reel compliant to eia-481a line 1: ecliptek line 2: eh11 ts series designator line 3: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 4: xx y zz week of year last digit of year ecliptek manufacturing identifier note: pin 1 shall be designated with a dot ? pin 1: tri-state pin 4: case ground pin 5: output pin 8: supply voltage tape and reel dimensions all dimensions in millimeters mechanical dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a lead integrity mil-std-883, method 2004 solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-883, method 210 resistance to solvents mil-std-883, method 215 pin 1 locator for gull wing (1) for ?g? option 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice.
|
